WEN MSA750T 750 lb Capacity Heavy Duty Miter Saw Stand - Portable Workbench for Woodworking, Construction & DIY Projects

When it's in a Collapsible position and it's set on the ground (on any surface) you need to put a piece of 2" x 4" sideways under the frame near the handle, because it's "WAY" too much weight on the handle and much easier to grab the handle, too. I added 2 washers on the in and outside of the wheels to take up the slop. Needs a little tweaking on some parts. Good for the homeowners, but don't seeing it lasting very long on a construction jobsites!This is pretty handy, I attached my saw and was able to take it off easily with the clamps and store them separately. Only negative is the rollers on the end don't seem to stay set very well. I'll say I noticed this most when working with larger stock like 6"x6". Kind of a pain to have to keep bringing the roller back up to keep the piece level when cutting near one end. I tightened them as tight as I could get by hand but they still moved too easily for my taste.other than that one gripe it works well, is pretty easy to move around even while it's set up and folds up nicely to store out of the way.I’m really happy with this stand! It was fairly simple to assemble and reasonably priced. It’s a big stand upgrade for me going from a small craftsman stand trying to cut longer boards without side support/stability. This should last me a while and will work when I decide to upgrade my saw.This stand is well built for the typical home/shop use. However, whoever is putting their hardware kits together needs retrained and the short bolts need changed. Supposed to come with four long bolts which are too long and small to use on a Dewalt 12 inch saw. Also supposed to come with four "shorter" bolts large washers and wing nuts. None of the short bolt supplies were in the kit. Called Wen - no problem we'll send you a new hardware kit. Arrived quickly - same long (2 ½) bolts. This time there were TWO short 5/8 long bolts and two washers. A 5/8 bolt is to short to hold any saw down and the bolt head was the wrong design. Ended up at big box hardware digging through the drawers to find correct hardware. Once that was done I'm happy with the stand.Product will work okay, but one of the saw support arms was not bent correctly at factory. Will have to shim saw to get it level.I had a good size DIY project coming (playset with swings) That called for over 50 pieces of lumber 8', 10' & 12' long that had to be cut to various sizes. I already have a Ryobi 10" dual bevel miter saw, but for smaller projects I just put on a small work table and supported the board with a sawhorse and a few scraps of wood. But with the large job, I needed something better. This unit is awesome, once it's all set up and locked in place it's good and solid. The saw bolted right on, and I could see that no matter what configuration another brand of saw might be, it would bolt right on. One knock I've seen in other reviews is that it won't stand up with the saw on it when it's folded up. One reviewer showed a picture of a scrap of 2 X 4 he crewed on to the bottom of the support, works like a charm. I can't think of a reason to buy one of those $200+ units, this one works absolutely fine.Everything was fine except the bolts they gave you to bolt the Saw on were to small and cheap. The threads stripped when barely tightening them. I used REAL bolts 1/4" with Washer and Lock Washer and then it was great.My DW715 is a 12" saw that weighs over 50 pounds. It mounted find to this stand without any problem. It's easy to collapse and the wheels make it easy to transport. This is an excellent product at this price point.Cons:- The 3-outlet power adapter has no power ratings on it but appears to be standard 15-amp/1800 watt grade. Powering anything more than the saw itself is not safe.- This is meant to be portable but there is no foot to stand it upright. It needs to be laid down or leaned against something to store. There are no wheel locks so the stand could crash to the ground when leaned against. This is unsafe and could damage your saw.This is a very good stand for the money. It's sturdy and well constructed with features that more expensive stands don't have like onboard outlets and solid wheels. I would like to see more hardware given for the mounts like different bolt lengths and washer sizes but not a deal breaker.I took one star off because there were two small areas where the finish came off when wiping some packaging grease. Unsure of it was Amazon, the manufacturer or shipping but in the end that should not be the customer's problem.After initial setup, it seems to be a decent stand for the price. It was easy to put together and seems pretty sturdy. The mounting system for the saw could be better as the front seems to lift up when clamped on with my 12" sliding compound mitre. This causes your workpiece to only rest on an edge on the material extension rollers. Hardware for mounting the saw is a little on the light and cheap side so I will be replacing that with custom hardware. The stand will not stand vertically for storage without a modification of a plate on the wheel side roller extension. This is also a modification I will be adding. Wen could fix this by making the flat plate on the roller a little longer and wider. Its a bit of a balancing act to fold up the legs with a saw attached. Overall still happy with the purchase and will be making a couple modifications to make it ideal for my setup. I will update after a few months of use.The stand bars will deflect if the saw is mounted with its fence at the rear side of the material supports/ rollersThe quick clamps supplied aren't able to deal with this deflection and their interface radius (all plastic) is neither tight or deep enough to offset to issue.Just assembled the stand and mounted the saw (10" Glide) for no reason - have to take apart and return.Maybe functional for lighter framed smaller saws i.e. a small blade non-sliding miter saw costing half as much as this stand.This is a great stand. Love how easy it is to set up and start cutting. The wheels are a great bonus and help alot when it come time to pack up. Great product!great having the 3 plugs on the end.fit my Ryobi 10" MITRE sawBolts to hold the saw on could have been bigger.