Model 66005 Low Speed Diamond Wheel Saw Goniometer for Precision Cutting | 50180-05 | Ideal for Electron Microscopy, Material Science & Lab Research

Product Description

Compact, multipurpose, precision saw that uses diamond wheels up to 7" in diameter -Terminates cutting when wheel rotation is impeded -Coolant reservoir is easily removed -Use soluble and oil based coolants The Model 660 is designed to be a multipurpose precision saw using diamond wheels up to 7" in diameter Operation: A sample is mounted to a sample holder and attached to the arm. An appropriate load is applied by adjusting the counterbalancing weight and the automatic stop switch is set. Using a coarse adjustment, the sample is positioned in any starting position relative to the diamond wheel and then a micrometer is used for precise sample positioning. With the diamond wheel rotating slowly and coolant in the reservoir, the arm is gently lowered until the sample touches the diamond wheel. Cutting will continue until the automatic cutoff switch is triggered. Accessories Model 65001 Single-Axis GoniometerThe Model 65001 has a graduated scale with a 0.2 Vernier and can be rotated 360. This rotational capability makes it ideal for precisely slicing single crystals. The sample is mounted to a block using a low melting point wax and the block is subsequently clamped into the Model 65001. Wax mounting of the sample ensures that the cut piece will remain attached to the holder and will not be damaged by falling after being cut.Model 65004 Petrographic Sample HolderThe Model 65004 is designed to use a vacuum to hold 2.5 x 5.0 cm glass plates, onto which petrographic or other samples are waxed, while making saw cuts parallel to the glass plate. The glass plate is held against a stainless steel support plate with vacuum and is placed firmly against 3 locating pins to maintain its position.Model 65005 2-Axis GoniometerThe Model 65005 is a 2-axis goniometer used for orienting and cutting single crystals. The Model 65005 can be mounted on an x-ray track for orientation using the Model 65011 Track Mount and then transferred to the Model 650 for cutting. With the sample mounte